Faucet Repair in Morrow, GA

Morrow at a glance

Morrow grew along I-75 around Southlake Mall and Clayton State University, and its houses show their age: the median home dates to 1971, and about 62% were built before 1980. In those homes a plumber often finds two-handle faucets, original multi-turn stops and corroded mounting nuts that make removal slow. Clayton County Water Authority, headquartered in Morrow on Battle Creek Road, supplies water and owns the service line up to the meter; from the meter in is the customer's. CCWA also tests residential backflow devices itself. Plumbing permits come from the city's Planning & Economic Development department, through Community Core or paper forms at City Hall.

Steps to take right away

1. Know where the main shutoff is, usually where the line enters the house or near the meter, in case a valve gives out.
2. Open the faucet to relieve pressure, then dry the cabinet so any new drips are easy to spot.
3. Pin down where the water is coming from: the spout, under the handle, the base, the sprayer hose or the supply connections.
4. Watch the cabinet floor and the wall behind the sink for soft spots or staining.
5. Resist cranking the handle harder to stop a drip; that tends to crush the washer or seat and make it worse.

What the symptom usually means

Why one faucet job costs more than another

• Hidden damage. A slow leak that has soaked the cabinet floor or subfloor can turn into more work than the faucet itself.
• Outdoor spigots. A washer is quick; a frost-free sillcock that split inside the wall may mean opening a wall or working from the crawl space.
• Countertop material. Stone, solid surface and tile change how a faucet comes out and goes back in, and drilling new holes is a bigger job.
• Parts availability. Mainstream brands have cartridges on supply-house shelves; an unbranded or discontinued faucet is harder to match, which tilts the decision toward replacement.